Back to notes
What is the next step after drilling out the threads for the Torx screws?
Press to flip
Insert the long side of the L bolts into the larger holes and thread the T 40 screws into the L bolts loosely.
What is the purpose of the rubber mallet in the installation process?
To tap the plastic pipe caps into the open ends of the tree kicker until flush.
How is the tree kicker mounted to the vehicle?
Align the tree kicker with the L bolts, install a washer and nylock nut on each L bolt without tightening completely.
Describe the final tightening process of all components.
Completely tighten the two T 40 screws on the L bolts and then tighten the half-inch nuts.
What step should be repeated for the other side of the vehicle?
Follow the entire installation process again.
Which models of Polaris RZR are supported for installing tree kickers?
2014 and up two-seater models including 900s, 1000s, XP 1000, XP turbo, and Turbo S models.
When should the third Torx screw be removed during the installation?
After inserting the L bolts and threading in the T 40 screws loosely.
What is the final step to secure the top flange of the tree kicker?
Pin the top flange in place and secure it completely with the previously removed T 40 screw.
What hardware is supplied with the Polaris RZR tree kickers?
4 plastic pipe caps, 4 half-inch L bolts, 4 half-inch nylock nuts, 4 half-inch washers.
What bit size is needed for drilling out the threads where the Torx screws were seated?
5/16 metal bit.
What tools are needed for installing Polaris RZR tree kickers?
Drill with 5/16 metal bit, rubber mallet, 3/4 inch socket, T 40 screwdriver.
After securing the top flange, what should be done?
Tighten all screws and nuts completely.
What should be done after removing the Torx screws from the bottom side of the machine?
Use a drill with a 5/16 metal bit to drill out the threads where the Torx screws were seated, then blow away metal shavings.
Which specific tool is used to remove the Torx screws?
T 40 screwdriver.
Describe the initial step when beginning the installation of Polaris RZR tree kickers.
Organize all supplied hardware and needed tools.
Previous
Next