Installation Instructions Summary

Installing the Extractor Hood

• Preparation: Read the instructions carefully.
• Cabinet: Must be mounted without a bottom piece; cut a hole for the extractor pipe using the provided pattern.
• Installation:
  • Remove all plastic protection covers.
  • Fix the hood according to the assembly instructions (variety in fitting the pipes).
• Important Tips: Install hood before the hob to avoid damage to the hob.
• Incorrect Installation Solution:
  • Saw a diagonal cut in the bottom piece all the way to the back.
  • Loosen the cam locks, remove the screws and dowels.

Installing an Oven in a Base Cabinet

• Preparation: Read assembly instructions to determine correct height for support rail.
• Installation:
  • Measure and place the reinforced shelf.
  • Fix the rail with screws from the oven package to prevent movement.
• Post-Installation: Avoid fixing the shelf too tightly; adjust rail for ventilation gap.

Installing an Integrated Dishwasher

• Legal Requirements: Use a protection shield for leakage.
• Preparation: Place connecting devices for the dishwasher.
• Installation:
  • Use filler piece to cover the gap.
  • Fix pads to prevent scratches; adjust the height of front and back legs.
  • Fit water pipes and electrical cables into the adjacent cabinet.
  • Attach fronts to the machine using pre-drilled holes and additional holes as needed.
  • Mount sliding hinges and place protection strip on the worktop underside.
  • Align the dishwasher front by adjusting the legs’ height.

Preparing Worktop for Sink and Hob Installation

• Preparation: Adjust worktop length if needed.
• Cutting:
  • Ensure straight cuts using anti-slip guiding rail or G-clamps.
• Installation:
  • Mark measurements for hob and sink.
  • Follow correct procedure for worktop cutouts, leaving distance for wall covering (at least 55mm).
  • Place sealing strip around the hob; ensure tight fit with clips.
• Sink Installation:
  • Trace and cut outline on the upside-down worktop.
  • Apply silicone on edges and sealing strip; place clips and screws on the sink.
  • Install the sink and drainage; protect worktop if installed above a dishwasher.

Installing an Integrated Fridge and Freezer in a High Cabinet

• Preparation: Use reinforced shelf if freezer is shorter than the cabinet door.
• Installation:
  • Measure placement of upper shelf for fridge fastening.
  • Use ventilation grid to prevent items from falling behind.
  • Install cabinet doors with 95-degree hinges.
  • Plug in and place fridge/freezer in the cabinet.
  • Use ice scraper to measure proper appliance depth.
  • Fasten appliance to upper shelf and cabinet wall.
  • Connect appliance doors to cabinet doors.
  • Finish with protection cover.

Installing a Microwave Oven in a Cabinet

• Placement: Place microwave on a shelf within the cabinet.
• Covering Gap: Use stainless steel effect filler piece (‘Hairlander’) to cover and enhance appearance.