3D Printed Props: Painting Red Hood Helmet (Part 3)

Introduction

• Presented by: Kevin from 3D Printed Props
• Objective: Final painting of a Red Hood helmet from Villainous Prop Shop.
• Series Info: Part three in a series on creating the helmet.
• Current Progress: Helmet is finished, sanded, and primed.

Preparation

• Surface: Ensure a glossy, glass-like surface to ensure paint adheres well.
• Paint Family: Use the same brand of paint to avoid reactions like orange peeling or cracking.
  • Example: Using Duplicolor Metalcast Red.

Paint Steps

1. Base Coat: Apply a chrome base coat before the red.
   • Recommendation: Use Duplicolor Chrome for consistency.
2. Clear Coat: Protect the paint and give it a gloss finish.
   • Use Duplicolor high-gloss clear coat.

Exception to Paint Family Rule

• Testing Different Paints: Conduct a test (e.g., spoon test) to check compatibility.
  • Tested different base coats (chrome, white, gold, primer, red) with spray paints.
  • Decision: Chose a gold base for its warmth and look.

Painting Process

1. Gold Base Coat: Workflow & Troubleshooting
   • Apply Rustoleum gold as a base.
   • Fix any paint runs with high-grit sandpaper (400 or 600).
2. Red Metallic Top Coat: Tips
   • Use light coats and wait 30 seconds between each to prevent runs.
   • Maintain the helmet face up to avoid catching runs on edges.

Clear Coat Application

• Technique: Stay 8-10 inches away, apply light, even coats.
• Result Expectation: Starts wet-looking, will dry to matte as selected.

Detailing

• Fine Details: Use a fine brush for small edges and cuts.
  • Clean excess paint with a cloth or finger.
  • Noteworthy: Paint sides and not just gullies.
• Eye Detailing: Workflow
  • Use thicker brushes for larger areas; Vallejo paints for single-pass coverage.
  • Technique: Pull paint along the line, staying below the ridge line.

Final Results

• Helmet Appearance: Matte metallic look, accentuates contours.
• Next Steps: Work on fitting and back-plate attachment to prevent wobbling.

Conclusion

• Future Videos: Continue with fitting, LED installation, weathering, and final touches.
• Engagement: Encourages viewers to like, subscribe, and watch for upcoming videos.