How to Install a GE Dishwasher (Model GDT605)

Pre-Installation Components

• Included with Dishwasher:

  • Owner's manual
  • Installation guide
  • Drain hose extension
  • Electrical box cover
  • Bag of screws and side mount covers
  • Brackets for installation
  • Extra insulation
  • Side trim pieces

• Recommended Additional Items:

  • Dishwasher kit with:
    • Steel braided supply hose (3/8 inch)
    • Three wire nuts
    • Brass elbow for supply line
    • Power cord (if not hardwired)
  • Standard tools

Preparing the Dishwasher

1. Lay Dishwasher on Back: Provides access to all necessary parts.

2. Remove Kick Plate: Use a nut driver or Phillips screwdriver.

3. Electrical Connection:

   • Direct plug-in or hardwire option.
   • Connect power cord by feeding it into the electrical box and securing wires with wire nuts.
   • Cover the electrical box with the provided cover.

4. Install Supply Line:

   • Use brass elbow fitting to connect the supply line.
   • Be careful to avoid cross-threading.
   • Tighten by hand and then secure with pliers.

5. Connect Drain Hose Extension:

   • Attach the extension to the built-in drain hose.
   • Use a clamp to secure it.

6. Adjustable Feet Installation:

   • Reinstall feet removed from the shipping crate for leveling.

Installation Steps

1. Place the Unit:

   • Ensure insulation blanket remains intact and positioned at the rear.
   • Slide the dishwasher into place while feeding lines under the sink.

2. Level the Dishwasher:

   • Adjust the feet for height and leveling.
   • Ensure the dishwasher is level with the floor.

3. Connect Plumbing:

   • Connect the supply line to the hot water valve and check for leaks.
   • Attach the drain hose to the garbage disposal or PVC piping. Ensure hose elevation to prevent water sitting.

4. Secure the Dishwasher:

   • Depending on countertop type, use side mount brackets or under-counter brackets.
   • Adjust and secure brackets before sliding the unit fully into place.

5. Final Steps Before Use:

   • Ensure all packaging from inside is removed.
   • Run a test cycle to verify functionality.
   • Install side trim pieces if space allows.

6. Install Kick Plate and Insulation:

   • Slide additional insulation into place above the electric cover.
   • Install kick plate using guide to adjust height and alignment.

Tips

• Always verify no leaks exist after connecting water supply.
• Ensure electrical connections are tight to avoid shorts or malfunctions.
• Use the provided insulation to reduce noise and improve efficiency.

Conclusion

• Test the dishwasher after installation to confirm it's working properly.

• Adjust and secure all parts before final completion.

• Like and subscribe for more installation guides. Feel free to comment with questions.