How to Change a Tire - Fix It Samad Channel
Introduction
- Channel: Fix It Samad
- Topic: Efficient and secure method to change a tire.
Initial Steps
- Activate Flashers: Ensure flashers are on for visibility on the road.
- Car Position:
- Ensure the car is in park.
- Lift the handbrake to prevent movement.
Preparation
- Trunk Access:
- Remove the cover in the trunk.
- Follow instructions provided there.
- Check Tire Condition: Verify the spare tire is in good condition before starting.
Removing the Flat Tire
- Initial Loosening:
- Slightly untighten the screws before using the jack.
- Jack Installation:
- Align the jack with the designated line (triangle mark).
- Lift the car until about half an inch of space is between the tire and the floor.
- Screw Removal:
- Fully remove screws and take off the flat tire.
Installing the Spare Tire
- Align the Spare:
- Position the spare tire properly.
- Securing Nuts:
- Put on the first and second nuts.
- Lightly tighten them to hold the tire in place.
Final Steps
- Lower the Jack: Carefully lower the car back to the ground.
- Fully Tighten Screws: Ensure all screws are tightened to the maximum.
- Check Spare Tire Instructions:
- Follow speed limits specified for the spare tire for safety.
Conclusion
- Reminder: This is a temporary tire; adhere to speed limits for safety.
- Call to Action: Subscribe to Fix It Samad's channel for more tutorials.
Importance
- Safety: Properly changing a tire ensures safe driving.
- Efficiency: Following these steps provides a quick and efficient tire replacement.
Note: This guide is for informational purposes. Always consult your vehicle's manual for specific instructions.