If you're using services from a wide area network provider or an internet service provider, there needs to be a physical location that designates the connection point between the provider's network and your internal network. We refer to this location as the demarcation point, or simply the demarc. This demarc might be a location that's connected to your home.
For example, you could have a telephone network interface or a similar box that's provided by your internet service provider. And that box is the demarcation point. If you're in a company, there's usually a location inside of the building that's considered the demarcation point.
Usually, everyone knows where the DMARC is located. And when somebody needs to install a new wide area network connection, they're usually sent to the room that we consider to be the DMARC. The location of this DMARC is important, especially when problems are occurring. So you can understand whether the problem is on the provider side of the DMARC or whether it's on the provider side of the DMARC.
your side of the DMARC. Usually, if it's on your side, you have your own equipment, your own routers, and it's on your own premises. We often refer to this as customer premises equipment or CPE, and you'll hear this often referred to as the customer prim.
This is where you would then connect to your network to do troubleshooting. If you can connect to the provider side on the DMARC and perform all of the same tests and still have a problem, then you know that the issue is somewhere on the provider side. It's obviously much easier for the provider if they don't have to come into your building, into a room, to the DMARC location to be able to perform this troubleshooting. Instead, they'll put in specialized equipment that they're able to control remotely. Often, this equipment is a smart jack.
This is technically a network interface unit, or NIU. You'll see these on the wall. They'll usually have blinking lights and status lights.
And they're usually in a locked container with limited access because this is equipment owned by the network provider. This is obviously much more intelligent than just having a single RJ45 connector. This is a powered system that is monitoring and is able to provide diagnostics remotely.
So the provider can connect to the SmartJack, run their own tests, and determine if the problems that are occurring are something that's in the provider side of the network or if it's something that might be on your side of the network. network. Even though you may not have physical access to the SmartJack, you are able to view the SmartJack through these windows.
And very often, you're able to see alarm notifications and other status lights that might help you understand more about the connectivity that you have to that wide area network provider.