Overview
This guide explains how to use PoolRx to control algae and reduce chemical usage in swimming pools of various sizes, providing dosage recommendations and maintenance tips for optimal effectiveness.
PoolRx: Purpose and Active Ingredient
- PoolRx eliminates all algae and reduces chemical usage in pools.
- The active ingredient is copper sulfate chelated.
Product Sizing and Selection
- PoolRx comes in different sizes for various pool volumes.
- Use the black unit for pools of 20,000–30,000 gallons (e.g., 25,000 gallons).
- Use the blue unit for 7,500–20,000 gallons (e.g., 18,000 gallons).
- For 40,000-gallon pools, use two blue units.
- Specific units are available for spas, including Sundance models.
Application Instructions
- Calculate pool volume to select the correct PoolRx size.
- For saltwater pools, PoolRx extends salt cell life by allowing lower output.
- When using 3-inch chlorine tablets, PoolRx helps reduce tablet usage and conditioner levels.
Pre-Installation Checks
- Test the pool for metals before using PoolRx; treat and remove metals if present.
- Ensure the filter is clean; after installation, avoid backwashing D.E. or sand filters for 2 weeks.
- Balance pool water chemistry according to test results (pH, alkalinity, conditioner).
- An example tester used is the Lamotte Waterlink Spin Touch.
Installation and Maintenance
- Insert PoolRx into the skimmer basket or directly into the pump basket for maximum flow.
- Run the pool system for 3–4 hours after installation.
- PoolRx lasts up to six months, covering the typical pool season.
- If algae reappears or chlorine needs increase, replace the unit or use a booster for extended use.
Recommendations / Advice
- Confirm water balance and cleanliness before adding PoolRx.
- For sensitive swimmers or those preferring lower chlorine, PoolRx supports low-chlorine maintenance.
- Follow manufacturer guidance for treating metals and filter maintenance before use.