Overview
The video reviews the EcoFlow Smart Home Panel 2 and Delta Pro Ultra, covering features, setup, connectivity options, and practical demonstrations for home backup and off-grid use.
Delta Pro Ultra Specifications
- 6,000W lithium iron phosphate battery with 3,500 cycles to 80% capacity.
- 7.2kW split-phase inverter (stackable, up to 5 batteries per inverter, 3 in parallel for 90kWh storage).
- Includes various AC/DC outlets: 120V (20A, 30A), 120/240V (30A), Anderson plug, low/high PV solar input, and USB ports.
- Magnetic, removable doors for easy access and cable management.
- New “X cooling” system uses heat pipes and fans for quiet operation.
- Inverter and battery mountable on optional rolling cart for portability.
Setup and Connectivity
- Battery and inverter connect via 90° cable; both have expansion ports for additional batteries.
- Panel and inverter connect through standard and generator ports.
- Smart Home Panel 2 serves as a subpanel; supports double pole circuits and generator lockout.
- Panel features NEMA 3R (outdoor) enclosure; bottom battery box is NEMA 1 (indoor only).
Smart Home Panel 2 Features
- Supports 12 circuits (expandable); prioritization settings in the app.
- WiFi/Bluetooth connectivity for remote control and monitoring via app.
- App allows scheduling, circuit control, monitoring of savings, consumption, and source (grid, battery, solar).
- Customizable operating modes: backup reserve, off-grid, scheduled tasks, UPS, and outage strategy.
Demonstrated Use Cases
- Connected and powered home loads (dryer, AC, stove, ovens) without issue.
- Switches between grid, battery, and generator seamlessly; UPS mode provides near-instant transfer during outage.
- Solar input demonstrated, though limited by weather during filming.
- Flexible installation: can power select circuits or the entire home.
System Operation Modes
- Option 1: Use 30A/240V transfer switch to power select circuits (up to one inverter/battery stack).
- Option 2: Use 50A generator port (with EcoFlow generator hub) for higher loads (up to two stacks).
- Option 3: Connect directly to Smart Home Panel 2 for up to three stacks, powering all circuits.
- Additional hub (future) under development for further expandability.
App Functionality
- Monitor and control battery, inverter, and smart panel use.
- Set up and name circuits, schedule tasks, and configure outage- or battery-based circuit priorities.
- Adjust charge rates, enable EPS (UPS) mode, update firmware, and monitor real-time data.
Recommendations / Advice
- Install battery connection box in a weather-protected area if the smart panel is outdoors.
- Prioritize essential circuits for backup and configure load shedding in the app based on battery state.
Questions / Follow-Ups
- Plans to test “time of use” mode and circuit prioritization during extended outages.
- Open to viewer questions regarding setup, features, and real-world use.