Lecture Notes: DIY Peel and Stick Wallpaper

Introduction

• Presenter: Blake
• Content: DIY peel and stick wallpaper application
• Objective: Detailed tutorial on how to apply peel and stick wallpaper effectively.

Tools Required

• Utility knife
• Tape measure
• Hairdryer
• Plastic putty knife
• Soft towel (optional to prevent scratching)

Preparation

• Measure the Wall:
  • Example Size: 105 inches by 111 inches
  • Calculate Square Footage: 81 square feet
  • Wallpaper Coverage: Each roll covers 14.5 square feet
  • Purchase Suggestion: Order extra roll for error margin

Wallpaper Characteristics

• Texture: Thin, paper-like
• Grid Lines: For easier straight-line cutting
• Design Example: Chevron pattern

Application Steps

Initial Application

1. Peeling: Unpeel like a sticker
2. Placement: Place on the wall and use putty knife from center outwards
3. Non-damaging Test: Wallpaper does not damage walls when applied/removed

Handling Issues

• Creases: Use a hairdryer for heat to straighten
  • Apply minimal heat
  • Pull slowly to remove crease
• Textured Walls: Apply with pressure; works fine

Applying Wallpaper

• Start on the left, work to the right
• Ceiling Overhang: Overhang wallpaper slightly if ceiling is uneven
• Baseboard: Use putty knife for firm application and utility knife for trimming
• Row Overlap: Overlap layers by a quarter inch

Outlet Handling

1. Turn Off Power: For safety, turn off breaker if necessary
2. Remove Cover: Before applying wallpaper
3. Application: Roll down and cut around outlet

Final Sections

• Tricky Areas: May require additional care or pre-cutting
• Edge Trimming: Use putty knife for neat finish

Conclusion

• Forgiveness: Wallpaper can be reapplied if initial attempt fails
• Final Advice: Take time and care when applying, especially in tricky areas
• Call to Action: Subscribe and like for more DIY content
• Presenter's Closing: Blake's signature sign-off and encouragement to save money