Sprinter TV Installation Guide

Introduction

• Installation of a 40-inch TV in a Mercedes Sprinter van.
• Objective: Set up AV (Audio/Video) system including Blu-ray, HDMI, and streaming.
• Sponsored by Sprinter Tain.

Initial Setup

• Important to consider power and video feed sources.
• Wiring essentials: 120 volts from an inverter, 12 volts DC for accessories.
• Recommend professional help if unsure about automotive wiring.

Battery and Wiring Setup

Safety Precautions

• Park the van and let it sit for 30 minutes before starting.
• Disconnect the factory ground using a chassis ground disconnect.

Power Wiring

• Use a 4-gauge wire for the power inverter.
• Connect via a 150 amp breaker.
• Route cables securely to avoid interference.
• Establish a master ground post for shared ground connections.

Switched 12V Power

• Utilize the existing terminal in the Sprinter for 12V switched power.
• Route the wiring under the seat to avoid damage.

Passenger-Side Wiring

Relay and Fuse Block

• Install a 200 amp relay for power distribution.
• Connect the main battery wire and a switched 12V source.
• Implement a fuse block for accessory connections.

HDMI and Power Cable Routing

• Drill a small hole in the ceiling for cable routing.
• Ensure cables are away from the airbag.
• Splice cables into factory wiring for neatness.

TV Mounting

Preparation

• Disassemble sun visor area to access mounting points.
• Use Van rear and front screws with spacers to secure the mount.

Mount Installation

• Use a T30 screwdriver for initial disassembly.
• Carefully install the mount by securing it with screws and spacers.

TV Attachment

• Recommended TV: Samsung or Vizio model.
• Ensure all hardware fits and securely mount the TV.

Testing and Final Adjustments

Power and Connections Test

• Connect power and HDMI to the TV.
• Ensure all connections are secure and cables are managed.

Operational Check

• Turn on the inverter to power the TV.
• Verify functionality with Blu-ray, HDMI input, and streaming apps.

Additional Considerations

• Cable management is crucial, especially around airbags.
• Ensure all components are properly grounded and secure.

Conclusion

• Successful installation results in a functional and safe AV setup in the Sprinter van.
• Sprinter Tain offers quality products and support for installations.

• Remember, always consult professional services if unsure about the installation process.
• For a detailed guide and resources, visit sprintertain.com.