Installing the AE 3500 Aroma Diffuser

Jul 22, 2024

Installing the AE 3500 Aroma Diffuser

Introduction

  • Presenter: Adrian, a service technician for Air Essentials
  • Purpose: Demonstrate installation of AE 3500 (same as AE 1100) via HVAC unit

Materials Needed

  • Tools:
    • Drill
    • Level
    • Drill bit
    • Mallet hammer
    • Screwdriver
    • Foil tape
    • Blue tape
  • Components from Box:
    • Clear hose
    • Screws
    • Anchors
    • Keys
    • Manual

Step-by-Step Installation

1. Electrical Outlet

  • Requirement: Electrical outlet near HVAC system
  • Solution: If unavailable, call an electrician or use an extension cord

2. Placement

  • Proximity: Close to the duct is ideal
  • Surface: Mount on wall if no ledge available
  • Balance: Ensure proximity to power source and duct
  • Tip: Use blue tape to mark hole locations without measuring

3. Mounting the Unit

  • Ensure space for doors to swing open for programming and oil refill
  • Use clear hose for direct airflow from diffuser to duct
    • Connection: Push-to-connect mechanism
    • Hose Tips: Avoid kinks, loops, or curves; measure and cut hose as needed

4. Tapping into Ductwork

  • Fiberglass Duct: Punch through with a screwdriver
  • Aluminum Duct: Use a drill to make a hole for the hose

5. Changing Aroma Oil

  • Safety: Wear gloves when handling oil
  • Process:
    1. Disconnect clear hose from unit
    2. Unscrew push-to-connect part
    3. Remove diffuser to change oil
    4. Reassemble and ensure connections are secure
    5. Keep keys handy by leaving them on the unit

Conclusion

  • Further Information: Link provided for programming instructions
  • Social Media: Subscribe to YouTube, like on Facebook, follow on Instagram

Additional Tips

  • Ensure the unit is level during installation
  • Verify connections are secure by giving them a light tug