How to Replace the Front Grill on a Ford F-150

Tools and Materials Needed

• 10 mm Nuts
• T25 Screws
• Trim Tool (preferably plastic to avoid scratches)
• Double-sided tape or special sticky foam (for badge reattachment)

Steps to Remove Old Grill

Step 1: Remove Nuts and Screws

• Remove 10 mm Nuts:
  • There are six 10 mm nuts at the top of the grill that need to be removed.
• Remove T25 Screws:
  • Six T25 screws are located at the bottom, holding the grill onto the brace.

Step 2: Detach Grill from Hood

• Use Trim Tool:
  • Metal clips along the top need to be disengaged. Use a plastic trim tool to pry the grill off if necessary.
  • Protect the hood paint by using tape if you're concerned about scratches.

Removing and Reusing the Badge

• Badge Removal:
  • The badge is held by three plastic pins (two with tabs).
  • Pry the tabs up while pushing down on the badge to release it.
• Badge Reattachment:
  • Use double-sided tape or provided sticky foam to attach the badge to a new grill.
  • Ensure the badge is seated properly.

Installing the New Grill

Step 1: Align and Secure the Grill

• Align Push Clips:
  • Line up the push clips on the grill with the holes in the hood.
  • Press the grill into place.

Step 2: Secure the Grill with Screws and Nuts

• Install Lower Screws:
  • Start by securing the lower screws. Ensure they are snug but avoid overtightening to prevent stripping.
• Install Upper Nuts:
  • Reattach the six 10 mm nuts at the top.

Final Notes

• TRQ Quality Assurance:
  • TRQ emphasizes quality aftermarket parts and the ability to guide you through installation processes with peace of mind.