Back to notes
How should the legs be attached to the bottom of the sink?
Press to flip
Push the four legs into the grooves on the bottom of the sink and use a block of wood and hammer to tap and properly seat each leg.
What is the significance of rubber gaskets inside the connectors of the supply lines?
They eliminate the need for thread tape.
How do you finalize the installation of the p-trap?
Connect the p-trap to the sink.
How is the faucet secured to the sink after insertion?
Spin one mounting nut onto each inlet to secure the faucet.
What tools are needed for the assembly and installation of the musty laundry sink?
Hammer, drill, hole saw, adjustable wrench, and level.
What tool is recommended for drilling holes on the ledge of the sink?
A 1-inch hole saw with a cordless drill.
What are the initial components provided with the musty laundry sink?
Four legs, leveling feet, leveling hardware for the feet, drain stopper, and nut for the p-trap.
What is the purpose of leveling hardware for the feet?
To ensure that the sink is level when installed.
Why should you place the sink on the cardboard it came in before attaching the legs?
To avoid scratching or damaging the sink during assembly.
What is the final step after connecting the drain lines and p-trap?
Turn on the water and check for leaks in the drain lines.
What are the steps for connecting the sink to the water supply?
Move the sink into position, thread the 3/8 compression nut from the supply line onto the hot and cold water supply valve fittings, then open each supply valve and check for leaks.
What should be done after attaching the leveling feet to the legs?
Flip the sink upright.
How long should you allow for the complete assembly and installation of the musty laundry sink?
At least an hour, with additional time if the drain lines are not already in place.
When connecting supply lines to the faucet, which color stripe corresponds to the hot water inlet?
The red stripe.
What additional component needs to be purchased for the musty laundry sink installation?
A 4-inch spread laundry faucet with supply lines, plastic gasket, inlet nuts, hex wrench for cartridge removal, and hose threads on the end of the spout.
Previous
Next