3-in-1 Multiboard for Flipper 0 Introduction

Overview

• Introduction to the 3-in-1 multiboard for Flipper 0.
• Three types of chips available on the board:
  • ESP32 Module
  • CC1101 Module
  • NRF24 Module

LED Indicators

• Red LED: Indicates selection of NRF24 module.
• Green LED: Indicates selection of ESP32 module.
• Blue LED: Indicates selection of CC1101 module.

Board Functions

• Button on the board:
  • Used to switch between different chipsets.
• RX and TX ports:
  • Located on the back of the board, specifically for the CC1101 chip.
  • Operate in two modes:
    • RX Position: Activates the receiving function of the CC1101 module.
    • TX Position: Activates the transmitting function of the CC1101 module.

Demonstration

• Connection of the multiboard with Flipper Zero.
• Switching between the modules:
  • Start with CC1101 (Blue LED).
  • Switch to ESP32 (Green LED).
  • Switch to NRF24 (Red LED).

Future Plans

• Upcoming videos will cover:
  • Installation of broader firmware on the ESP32 module.
  • In-depth exploration of the functionalities offered by the multiboard.

Conclusion

• A brief overview of the capabilities and features of the 3-in-1 multiboard.