So this is the introductory video of 3-in-1 multiboard for flipper 0. So over here you can see this is our board and over here there is a button. So this button indicates on which chipset we are. So this board has three types of chips.
We have ESP32 module, we have CC1101 module and we have NRF24 module as well. So if the LED is red that means we are on NRF24 module and if the LED is green that means we are on ESP32 module and if the LED is blue that means we are on CC1101 module. I'll connect this module in a moment with our flipper zero and I'm also going to show you how this board works. So at the back over here you can see we have RX and TX as well. This RX and TX is for CC1101 chip.
So when the switch is on RX position, that means the receiving function of CC1101 module has gain. So this button is for gain. And when the button is on TX position, that means we have the transmitting function is on gain.
The transmitting module is on gain. So this is our Flipper Zero board. Let me connect it with our flipper zero and let me show you. Let me turn on.
So over here you can see this is the blue light that means we are on CC110 module. And let me just switch it to green. So now we are on ESP32. And then there is NRF24 as well. So let me switch it over here.
So when the LED is red, that means we are on NRF24. So we can directly switch between modules in this 3-in-1 multiboard. So this is the introduction of this 3-in-1 multiboard.
We are going to go deep into this board. We are going to also install broader firmware on ESP32 chip, ESP32 module. in our coming videos and then we are going to see all the things which offered by this pool thank you