VersaGrow Kit Assembly Tutorial

Introduction

• Presented by Alan from GrowWays.
• Tutorial on assembling the VersaGrow kit without using the manual.
• Process is broken down into easy steps.

Assembly Steps

Materials

• Long black hose
• Rubber plug
• Elbow joint
• Shorter black hose
• Little nozzles
• Skinny hose
• Red drip spikes
• Water level indicator components
• Reservoir
• Water pump

Steps

1. Prepare the Long Black Hose

   • Cap one end with a rubber plug.

2. Attach the Elbow Joint

   • Connect to the other end of the hose.
   • Ensure holes on the black hose face upward.

3. Attach the Shorter Black Hose

   • Connect to the other end of the elbow joint.

4. Insert Nozzles

   • Insert nozzles into holes on the hose.
   • Ensure nozzles face downward.

5. Attach the Skinny Hose

   • Connect to the end of each nozzle.

6. Connect Red Drip Spikes

   • Attach to the end of each skinny hose.

7. Install Water Level Indicator

   • Insert rubber seal ring into bottom hole of reservoir.
   • Insert elbow joint into the rubber seal.
   • Should have a clear tube attached to show water level.

8. Set Up Water Pump

   • Place pump in reservoir.
   • Insert assembled drip hose through the provided hole and connect to the pump.

9. Final Steps

   • Place plants and push drip spike into each pot.
   • Ensure spikes are close enough to plants without harming roots.
   • Fill reservoir with water.
   • Optionally add a timer for automation.

Maintenance

• Regularly change water in the reservoir.
• System requires minimal maintenance.

Conclusion

• Alan encourages feedback, likes, and subscriptions.
• Emphasizes ease and efficiency of the VersaGrow system.

Tip: Consider adding a timer to automate the watering process further.