Hey guys, I'm Alan from GrowWays and today we will be assembling your VersaGrow kit. Your kit should come with a manual, but throw it aside because today's tutorial is super easy and as always I will show you step by step all the way through. With our kit we're going to start first with the long black hose and cap one end with the rubber plug.
Great! Next attach the elbow joint to the other end of the hose. Make sure the holes on the black hose is facing up when doing so.
After attach the shorter black hose onto the other end of the elbow joint. Next you'll insert the little nozzles into the holes on the hose. Make sure the little nozzles are facing down. Then you'll insert the skinny hose onto the end of each nozzle.
Almost done! Now take each red drip spike and connect them to the end of each skinny hose. It should look like this.
Next we'll install your water level indicator. Insert the rubber seal ring onto the bottom hole of your reservoir, and then you'll insert the end of the elbow joint into the rubber seal. You should already have a clear tube attached to the elbow. That will show your water level.
Cool, next place in your water pump and insert your assembled drip hose through the hole provided and connect the end to your pump. Your reverse grow is ready to go. Place in your plants and push in your drip spike into each pot.
You want each spike to be close enough to the plants but not too close where it can damage the roots. The very last step is to fill your reservoir with water and it is ready to use. You can also add a timer to your VersaGrow which will make your system completely automate.
You just have to change out the timer. the water in your reservoir every now and then and your plants will need almost zero maintenance. Well, I hope that I showed you something cool today that will help you with your grow.
As always, leave me a comment down below and hit the like and subscribe button for me. I'm Alan from GrowWays. Keep growing guys.